设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

ANSI/ASTM E2145-2001 医疗健康信息建模惯例

上一篇: ANSI/ASTM E2030-2001 荧光安全标志推荐使用指南
下一篇: ANSI/ASTM F1446-2001 防护头盔性能特征评定设备的试验方法和试验程序

Product Code:SAE J2084
Title:Aerodynamic Testing of Road Vehicles--Testing Methods and Procedures
Issuing Committee:Road Vehicle Aerodynamics Forum Committee
Scope: The scope of this SAE Information Report is confined to wind-tunnel testing, although it is recognized that many aspects of the aerodynamic characteristics of road vehicles can be investigated in other test facilities (such as water-tanks) or, especially, on the road. For example, coastdown testing is often used to determine aerodynamic drag (either in isolation or as part of the total resistance), and artificial gust generators are used to investigate the sensitivity of vehicles to cross-wind gusts.Also excluded from the present Report are climatic wind-tunnel tests of road vehicles, which are defined in more detail in Section 3. The Report covers the aerodynamic requirements of a wind-tunnel for automotive testing, together with the facility equipment needed and the requirements affecting the test vehicle or model. The test methods and procedures described here include those for six-component force measurements and measurements of pressures and velocities both on the vehicle/model surface and the surrounding flow-field.As already indicated, this document has been prepared in conjunction with a number of other SAE Information Reports and Recommended Practices (1-5), each of which provides greater detail than is given here on its particular aspect of automotive aerodynamic testing.
Rationale: The scope of this SAE Information Report is confined to wind-tunnel testing, although it is recognized that many aspects of the aerodynamic characteristics of road vehicles can be investigated in other test facilities (such as water-tanks) or, especially, on the road. For example, coastdown testing is often used to determine aerodynamic drag (either in isolation or as part of the total resistance), and artificial gust generators are used to investigate the sensitivity of vehicles to cross-wind gusts.Also excluded from the present Report are climatic wind-tunnel tests of road vehicles, which are defined in more detail in Section 3. The Report covers the aerodynamic requirements of a wind-tunnel for automotive testing, together with the facility equipment needed and the requirements affecting the test vehicle or model. The test methods and procedures described here include those for six-component force measurements and measurements of pressures and velocities both on the vehicle/model surface and the surrounding flow-field.As already indicated, this document has been prepared in conjunction with a number of other SAE Information Reports and Recommended Practices (1-5), each of which provides greater detail than is given here on its particular aspect of automotive aerodynamic testing.

标准名称：	工业镓化学分析方法 杂质素的测定 电感耦合等离子体原子发射光谱法
英文名称：	Chemical analysis emthods of gallium for industrial use--Determination of impurity elements--Inductively coupled plasma atomic emission spectrometric method
中标分类：	冶金 >> 金属化学分析方法 >> 轻金属及其合金分析方法
ICS分类：	冶金 >> 有色金属 >> 其他有色金属及其合金
发布部门：	国家发展和改革委员会
发布日期：	2008-03-12
实施日期：	2008-09-01
首发日期：
作废日期：
提出单位：	全国有色金属标准化技术委员会
归口单位：	全国有色金属标准化技术委员会
起草单位：	中国铝业股份有限公司河南分公司;中国有色金属工业标准计量质量研究所
起草人：	梁倩、王书勤、王晓雯、张予秋、张新宇
出版社：	中国标准出版社
出版日期：	2008-05-01
页数：	8页
书号：	155066·2-18701

本标准规定了工业镓中硅、钠、钾、镁、钙、铝含量的测定方法。
本标准适用于工业镓[99.9%≤ω(%)≤99.995%]中硅、钠、钾、镁、钙、铝含量的测定。

没有内容

没有内容

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件，其随后所有的修改单（不包括勘误的内容）或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件，其最新版本适用于本标准。
ＧＢ／Ｔ６０２—２００２　化学试剂　杂质测定用标准溶液的制备

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1